MRMC MOVER RV13, Quick Start Manual, Page: 20 / 44

RV13 Model Mover Quick Start Guide
16
7. At one of the holes insert the drop-in
anchor insert, threads upward, all
the way to the bottom.
8. Insert the anchor spreader tool into
the drop-in anchor insert.
9. Hit the top of the anchor spreader
tool with a hammer until the anchor
is fully spread in the concrete.
10. Remove the anchor spreader tool.
11. Repeat steps 7 to 10 for the other
three corners.
12. Put RV13 Model Mover in place over
the holes.
13. Insert the four retaining bolts
through the corners of the base and
into the drop-in anchor inserts, and
tighten.
7
Anchor
spreader
tool
8
9
Drop-in
anchor
insert
× 4 corners
13