- 58 -
VIII.
Battery and charge
8.1 Battery
This device adopts special lithium battery, with rated voltage of 3.7V, capacity of
5000mAh (18.5Wh) or 10000mAh (37Wh), and charging limit voltage: 4.2V.
8.2 charge
This device is designed to use lithium batteries. When being purchased, the
battery power may be insufficient. Please fully charge the device before using it.
When the battery power level shown in the upper right corner of the screen is 1%, the
battery power is very low. Please charge it in time. Please be sure to use the supplied
charger for charging. During charging process, the progress of charging will be shown
by percentage. When the battery is displayed as 100%, the charging is completed.
When the battery power of the device is reduced to about 3%, the camera will
stop working, so as to ensure the safe storage of the camera files.
Note: The equipment lighting and intelligent system use two independent
power supply circuits respectively. When the battery power is very low and the
power is turned off automatically, or under the condition where the device is not
turned on, the red and green signal lights and LED can still be turned on, which
is a normal phenomenon.
Please read the following precautions carefully before charging the battery,
●Please fully charge the device before using the battery for the first time,
● The battery will be discharged automatically if it is not used for a long time. Please
charge it before use.
● The battery can be repeatedly charged. Do not forcefully impact, vibrate, or throw
the battery, otherwise it may cause the leak of battery liquid, and damage, heat release,
explosion or fire of the battery.
● When the device indicates a low battery percentage, please charge it in time. After
the battery is completely discharged, the charging time will be significantly longer.
Therefore, if a low battery indicator appears, please charge it in time.
● Please remove the cable after charging, so as to prevent damage to the battery
after long-term charging