MRF 13105, Operator'S Manual

Page: 12 / 32

12
Installing and Removing
Attaching Quick-Tach Adapter on Tractor Loader to Skid
Steer Attachment (All Models)
1.
Move the wedge levers (A) to the unlocked (up) position.
2. Tilt the Adapter forward, and drive the tractor forward until the top
edge of the Adapter attaching plate is under the top flange (B) of the
skid steer attachment.
3. Raise the loader arms slightly until the Adapter attaching plate is
fully seated under the top flange.
4.
Tilt the Adapter backward to raise the front of the skid steer attach-
ment.
IMPORTANT
AVOID DAMAGE!
Adapter wedge levers may be damaged if they
strike the attachment. Be sure the wedge levers do
not hit the attachment during installation.