Installation MRD TNM4000
Release 02 12/2020
Industrial Switch >TNM4000
23
Mounting in a switch cabinet
Note:
Install the device in the 19" switch cabinet using sliding or mounting rails.
This provides a more stable position of your device in environments subject to
vibration.
For more information on sliding/mounting rails and how to install them, please
contact your switch cabinet manufacturer.
The devices are designed to be mounted in a 19" rack.
Make sure there is sufficient ventilation. If necessary, provide a fan for the
19" rack. This will prevent the basic devices from overheating.
Measure the depth of the 19" cabinet so that all the lines to be connected
can be fed in easily.
Install the sliding/mounting rails in the 19" switch cabinet as instructed by the
manufacturer, and make sure the device is resting on both rails.
Figure 7: Installation in the switch cabinet with sliding/mounting rails
1 - TNM4000-TP36FF4X16G24P
2 - Sliding/mounting rail
3 - 19" cabinet
On delivery, two brackets are offered to you.
Figure 8: Mounting bracket
