The MRCOOL
®
BodyCool™ Cooling T-Shirt uses a backpack cooling
system that circulates cold water around the body through an
embedded micro-tubing liner woven into the fabric of the shirt.
This provides maximum cooling performance during hot
conditions and keeps the wearer cool and comfortable. The
BodyCool™ system includes a backpack, liquid cooling T-shirt, 3L
quick release water bladder, mini water pump, rechargeable 5V
Lithium battery (10000 mAh power bank) & charging cable, and
quick connect fittings (that connect the piping of the shirt to the
backpack).
1. Take the power bank (battery) out of the backpack and check the
battery charge. The default charge of the battery is 80%.
2. Disconnect the bladder from the backpack circulation system
and remove it from the backpack.
3. Then, fill the bladder to the line with water, and lay it completely
flat in your refrigerator freezer and allow it to freeze. If the water
bladder is not laid flat, it could freeze the area around the quick
fittings in an irregular shape and make it difficult to reconnect.
Operating Instructions
Step I: Reassembly
1. After the water bladder is frozen, open the lock to add water
making sure the water flows into the lower quick fitting. Once it is
full, lock the bladder.
2. Connect the water bladder with the backpack circulation system
using the quick fittings.
DO NOT
connect quick fittings with
excessive force as this could damage the fittings and cause them to
leak. The ice inside of the water bladder should melt within 10-30
minutes. (You can pour warm water over the bladder to aid in
shortening the amount of time for the melting process if
necessary.)
3. Connect the power bank (battery).
NOTE:
You can turn on the switch to check for proper water
circulation before wearing the cooling T-shirt. You should also be
able to see the water flowing back to the water bladder. Using your
hand, you should be able to feel cooling from the micro-tubing in
5-10 seconds.
Descriptions:
Preparation:
