adjust
value
* If not insert probe
to PT1 input
socket, Meter buzzer
measuring value
will beep.
3) If intend to make the offset adjustment for Pt 2 , it should
insert the probe to PT2 input socket and Function select to
Pt 2 Function .
4) Pressing Offset button "
▲
button " and "
▼
button "
continuously at least 1.5 seconds then release, the
display will show Pt 2 example as following.
adjust
value
* If not insert probe
to PT2 input
socket, Meter buzzer
will beep.
measuring value
5) Use the "
▲
button "( 3-5, Fig. 1 ) "
▼
button " ( 3-6,
Fig. 1 ) to adjust the desiring value on right bottom
display.
Pressing " Enter button " ( 3-8, Fig. 1 ) once, the
adjustment value will save into memory then return
to normal measuring screen and finish the offset
adjustment procedures.
25
