CAUTION & WARNINGS
1.
Never leave the charger unattended when in use
2.
Do not leave the battery inside any radio-controlled product while charging.
3.
Place the charger and battery on a solid uncarpeted surface with good ventilation. Do not
charge the battery inside the full-size automobile as damage to interior can result.
4.
Do not connect the 120V A/C input and the 12V D/C input at the same time.
5.
Battery damage can occur if the charge current (Amps) rate is set too high. The default
charge rate is 3 Amps. Different capacity batteries may require a higher or lower charge
rate. Follow the “Plug n’ Play Instructions” in addition to battery manufacturer’s
instructions.
6.
If the battery or the charger becomes extremely hot, immediately disconnect the charger
from the power source and allow the battery and charger to cool.
7.
The charger is designed to charge ONLY (1-8 cells) nickel cadmium or nickel metal
hydride batteries. DO NOT attempt to charge Alkaline, Dry Cells, Gel Cells, Lead Acid,
Lithium, or other batteries with this charger. Damage to the charger, personal injury and/
or fire could result.
8.
Discontinue use if charger casing becomes damaged or cracked.
9.
Do not use the DC power source of a running full-size automobile engine.
10. Always disconnect charger from the power source when not in use.
11. Adult supervision is recommended for ages 12 and under.
SERVICE RETURN PROCEDURE
If it should be necessary to return the charger for service, please include a letter (printed
clearly) with your name, address, a daytime phone number, and a detailed description of the
problem you are experiencing. Please include $7.00 to cover the return shipping and handling
cost.
MRC will not accept any charger for repair that has been modified in any way.
Send to:
Attn: Parts & Service
Model Rectifier Corporation
80 Newfield Avenue
Edison, NJ 08837-3817
© 2002 Model Rectifier Corporation
80 Newfield Avenue
Edison, NJ 08837-3817
Telephone 732-225-6360
Printed in China
