MRC SI-600, Operation Manual

Page: 13 / 15

SI-600 Multi-tube Vortexer Chapter 4 Operation Guide
─
8
─
4. Pulsing mode
a)
Press “Stop” and “Short” key simultaneously
into pulsing mode, then the sign disappear
and red light is on.
b) Press Speed’s or Time’s “ ” key and “ ” key to set
the pulsing speed and time. In pulsing mode, the max.
timer time is 99min59sec.
c) If we set the pulsing time is 20 seconds, then press
“Start” key to run, it will pulse-on and pulse off times
with 20 seconds in 1 second intervals.
d) Press “stop” key to stop.
e) Press “Stop” and “Short” key simultaneously again
to quit the pulsing mode, then the sign display
again and red light is off.
2400
2400 2400
2400 02:00
02:00 02:00
02:00
rpm
m/s
2400 2400 2400 2400 0 00 00 00 0::::2 22 20 00 0
rpm
m/s
2400 2400 2400 2400 02:00 02:00 02:00 02:00
rpm
m/s