SI-500 Mix Smart Operational Manual
Chapter 4 Operation Guide
─
7
─
Chapter 4
Operation Guide
1. Speed and time setting
a)
When
the
instrument
powers
on,
display screen will show “ ”. one by
one. The instrument goes into the initial
state with the sound of “du…”
b)
After about 2s later, time display window
shows 9: 30 as the set timing time. It means
that the timing time is 9 hours and 30 minutes.
The speed display window shows 2000. It
means the set shaking speed is 2000rpm.
c) Press the key or below speed, tens digits
of set value will increase or decrease, and also
increase or decrease in hundred digits and
thousand digits. For instance, press the key and
hold on for 2s, the digits will be moved from tens
to hundreds, increasing the alteration range. If
you press the key for 2s again, the digits will be
moved from hundreds to thousands quickly.
d) Press key or below time, units will
increase or decrease, and also increase or
decrease in tens, hundreds and thousands. For
instance, press the key and hold on for 2s, the
digits will be moved from units to tens,
increasing the alteration range. If you press the
key for 2s again, the digits will be moved from
tens to hundreds quickly.
8888 88:88
rpm
h/m
m/s
2000 09:30
rpm
h/m
2000 09:30
rpm
h/m
2000 09:30
rpm
h/m
