2
3
Your satisfaction and safety require a complete understanding of this unit,
including
its proper function and operational characteristics. Be sure operators are
given
adequate training before attempting to put the unit in service.
1. Inspection:
The carrier, when accepting shipment, also accept responsibility for
safe
delivery and is liable for loss or damage claims. On delivery, inspect for visible
exterior
damage, note and describe on the freight bill any damage found and enter your claim on
the form supplied by the carrier.
2.
Inspect for concealed loss or damage on the unit itself
，
If
any, the carrier will arrange
for official inspection to substantiate your claim. Save
the shipping crate until you are sure
the unit has been delivered in good condition.
3. Return Shipment:
If for any reason you must return the unit, contact your
customer
service representative for authorization and supply nameplate data.
4. Accessories:
Make sure that all of the accessories indicated on the packing list is
included with the unit. Carefully check all packaging before discarding. If there are any
damaged or missing items, please contact your dealer.
Receiving and Inspection
Installation
Mini Roller Manual
Mini Roller Manual
The symbol showns to the left indicates that this product shall not be
treated as household waste. In line with EU Directive 2012/19/EU
for waste electrical and electronic equipment (WEEE), this electrical
product must not be disposed of as unsorted municipal waste.
Please dispose of this product by returning it to the point of
sale or to your local municipal collection point for recycling.
Disposal and Recycling Information
1. Control box installation (skip this step for
ROL
-02U series)
2. Roller
bars
removal
and installation
Roller
bars
can
be
removed and installed
for
different
sized
tubes
.
Fig-1
This unit is equipped with a separate control box (optional)
Please fasten the nut
on
the
connection plug of control box to the unit.
NOTE:
Keys on the panel of the unit will become invalid when control box is connected.
One
control
box controls
one
unit only
.
.
2.1 Roller bars
removal
Turn the knob counterclockwise
to
be
loose
on the unit end
(
see Fig-1) and then lift
the locking metal arm as shown in fig- 2
.
And
remove
it
.
Press
the
sheet
metal
to
the
original
position
and
clockwise
twist
the
knob
for
fastening
.
2.2 Roller bars installation
Turn the knob counterclockwise
to
be
loose
on the unit end
(
see Fig-1) and then
uplift the pressure sheet-metal
.
Aim
Hexagon
Hole
of
roller
at
Hexagon
shaft
of
the
unit
and
press
the
other
head
into
semicircle
orifice
.
Press the sheet metal to the
knob position and clockwise twist the knob for fastening.
Fig-2
3. Rocking roller bars removing and installation
3.1 Rocking roller bars removing
The way of removing the rocking roller bars is the same as the way of removing the
roller bars.(see 2.1)
3.2 Rocking roller bars installation
Counterclockwise twist the knob to be loose on the unit end(see Fig-1)and then uplift
the pressure sheet-metal. Place the hexagon hole of the roller at the hexagon shaft of the
unit and press the other head into semicircle orifice.After installing the first rocking roller
