3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529
com
.
mrclab
@
mrc
External Temperature Probe Input
Connect the K type optional External Temperature probe into the
back socket.
To Connect the External Temperature Controller
1.
Turn the Stir Control Knob and the main switch to the OFF
position.
2.
Disconnect power cord.
3.
Connect the External Temperature probe to the socket on the
back of the unit.
4.
Fill vessel with liquid to be heated.
5.
Place vessel in the center of the top surface.
6.
Place stir bar into vessel.
7.
Put the
temperature external probe in vessel.
8.
Reconnect power cord.
9.
Turn the main switch and the stirring switch to the ON
position.
10.
Product is now ready for use with External Temperature
Controller.
11.
Repeat the above process when disconnecting the
temperature controller.
CAUTION
Do not use the plate with external temperature probe in
the air or out of the liquid, this can cause serious damage
to the plate, due to lack of control.
The external probe must be properly placed into a liquid
on the top surface during the whole process, to prevent
damage to the plate
The top surface and the vessel used may be at substantially
higher temperatures than indicated by the setting on the
Heating Temperature Display as the controller regulates
the liquid temperature inside the vessel.
