MRC HPS-7 User Manual Download Page 2

 

3, Hagavish st. Israel 58817  Tel: 972 3 5595252, Fax: 972 3 5594529   

  

com

.

mrclab

@

mrc

 

  

General Remarks: 

 

 

Don’t spill any liquids into the Slide Heater 

 

Always replace the fuse from the same type & current 

 

The maximum working temperature is 100ºC 

  

 

IMPORTANT SAFETY INSTRUCTIONS 

 

WARNING 

 

1.

 

Do not heat any slide above 100ºC which will cause hazards of explosion, 
implosion or release of toxic or flammable gases arising from the materials 
being heated. 

2.

 

Do not use in the presence of flammable or combustible materials or explosive 
gases. 

3.

 

Do not use in the presence of pressurized or sealed containers. Fire or 
explosion may result, causing severe injury or death. 

4.

 

To avoid electrical shock, always use a properly grounded electrical outlet of 
correct voltage and current handling capacity. 

5.

 

The user has the responsibility for carrying out appropriate decontamination, if 
hazardous material is split on or inside the equipment. 

6.

 

The user shall be aware that, if the equipment is used in a manner not specified 
by the manufacturer, the protection provided by the equipment may be 
impaired. 

7.

 

The instrument should be placed so, that handy operation of the ON-OFF 
power switch is possible, and that the mantle power cable can be disconnected 
from the main in case of risk. 

 
Operation instruction: 
 

Digital controller: 

 

 

Reviews: