2) If select the lcd display show " YES ", press the " Enter Button
" ( 3-8, Fig. 1 ) once , the Display will show text
" Enter " and " YES " to Flashing interaction , if make sure to do the
SD memory card format , then press " Enter Button "
once will format the SD memory ( display will show "SD CARD & For-" )
and clear all the existing data that already saving into the SD card.
* if no sd memory card , the Display will show text " SD CARD " and
" EMPTY " then jump to next setting .
7-7 Set mesurement value gain.
When the lcd display show " CAL "
1) Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button "( 3-6, Fig. 1 )
to set mesurement value gain.
2) After Display will show gain value, press the " Enter Button "
( 3-8, Fig. 1 ) will save the setting value with default.
7-8 Set the alarm unit and value .
When the lcd display show " ALARM value "
1) Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button "( 3-6, Fig. 1 )
to set alarm unit ,then press the " Enter Button " .
2) After Display will show alarm value,use the "
▲
Button " or "
▼
Button "
set alarm value, then press the " Enter Button " ( 3-8, Fig. 1 ) will save
the alarm value with default.
7-9 Select the alarm function yes or no.
When the led display show " ALARM YES/NO "
1) Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button " (
3-6, Fig. 1 ) to select the alarm function to show " YES " or
"No ".
YES - the alarm function to enable.
NO - the alarm function to disable.
17