MRC DRS4000, User And Technical Manual

Page: 35 / 88

Routine Operation 2-19 DRS4000 Receiver User and Technical Manual
2.9.8 Set Video Color Bar Output
The steps required to set the video color bar output to On or Off
are provided in Figure 2-21 .
Figure 2-21: Set Video Color Bar Output
Control menu is
displayed Select Setup and
press OK
Setup Menu is
displayed
Select Audio/Video
Configuration and
press OK
Configure Audio/
Video X
menu is
displayed
Select Set Video
Output and press OK
Set Video Output
menu is displayed
Select On or Off , as
required, and press
OK
Press Back until
Control menu is
displayed
NOTE
It may be necessary
to select
More... or
Back... to locate the
Set Video Output
option.
2.9.9 Adjust Analog Audio Level
The steps required to adjust the analog audio level are provided
in
Figure 2-22 .
Figure 2-22: Adjust Analog Audio Level
Control menu is
displayed Select Setup and
press OK
Setup Menu is
displayed
Select Audio/Video
Configuration and
press OK
Configure Audio/
Video X
menu is
displayed
Select Adjust Analog
Audio Level and
press OK
Adjust Analog Audio
Level
menu is
displayed
Press Back until
Control menu is
displayed
Select Channel 1 and
enter attenuation level
required (Range is 0.0
to 6.0 dM)
Select Channel 2 ,
enter attenuation level
required (Range is 0.0
to 6.0 dM), and press
OK
NOTE
It may be necessary
to select
More... or
Back... to locate the
Adjust Analog Audio
Level
option.