MRC DRS4000, User And Technical Manual

Page: 32 / 88

Routine Operation 2-16 DRS4000 Receiver User and Technical Manual
2.9.4 Change Use Service Information Mode
The steps required to enable or disable the service information
mode are provided in
Figure 2-17 .
Figure 2-17: Change Use Service Information
Control menu is
displayed Select Setup and
press OK
Setup Menu is
displayed
Select Audio/Video
Configuration and
press OK
Configure Audio/
Video 1
menu is
displayed
Select Use SI Service
Information and
press OK
Use SI Service Info
menu is displayed
Select On or Off and
press OK
Press Back until
Control menu is
displayed
2.9.5 Review or Change PIDs
The steps required to review or change audio and/or video
program identifiers (PIDs) are provided in
Figure 2-18 on page 2-
17 . Please note that PIDs can only be changed if the Use SI
Service Information option is set to Off .