13 Technical data
Maschinenfabrik Reinhausen GmbH 2020
58
1800138/08 EN
TAPMOTION
®
ED
The decisive power loss of the position transmitter module is 0.6 W because
in the worst-case scenario only one resistor is energized. The supply voltage
should not exceed DC 220 V. If your setup is more demanding, please con-
tact Maschinenfabrik Reinhausen.
Position transmitter module with N/O contact range (break-before-make
contact)
AC: 250 V, 0.5 A (resistive loading)
DC: 220 V, 0.2 A (resistive loading)
Minimum voltage level for signal and data processing: 24 V
Position transmitter module with N/O contact range, (make-before-
break-type)
AC, DC: 250 V, 0.02 A (resistive loading)
AC, DC: 24 V, 0.20 A (resistive loading)
Minimum voltage level for signal and data processing: 24 V
Position transmitter module with N/O contact range, 10 A (make-before-
break-type) for controlling current matching transformer in industrial
applications.
AC, DC: 250 V, 10 A (resistive loading)
Position transmitter module, diode matrix
DC: 220 V, 0.2 A (resistive loading)
Minimum voltage level for signal and data processing: 24 V
Permissible ambient conditions
Motor-drive unit version
Operating temperature
Storage temperature
Standard
-25 to +50°C
-50 to +70°C
The heater must be in constant operation in the
temperature range of -50 to -40°C
Standard with ISM
-25 to +50°C
-25 to +70°C
Arctic with thermostat-controlled
additional heating
-40 to +50°C
-60 to +70°C
All heaters must be in constant operation in the
temperature range of -60 to -40°C
Arctic with thermostat-controlled
additional heating with ISM
-40 to +50°C
-40 to +70°C
All heaters must be in constant operation in the
temperature range of -40 to -25°C
Arctic with thermostat-controlled
additional heating and additional
heating for transmission gear
-60 to +50°C
-60 to +70°C
All heaters must be in constant operation in the
temperature range of -60 to -40°C
13.3
