Glossary
Maschinenfabrik Reinhausen GmbH 2018
187
5252433/02 EN
ECOTAP® VPD® CONTROL PRO
Glossary
ASTM
American Society for Testing and Materials
DIN
Deutsches Institut für Normung (German Institute
for Standardization)
EMC
Electromagnetic compatibility
EN
European standard
Generator sign convention
Definition for describing electrical circuits. The ar-
rows for current rating and voltage on a "con-
sumer" absorbing electrical power (e.g. a resis-
tor) face opposite directions. U*I is the power
generated in the component and -U*I is the
power absorbed by the component.
ICD
IED Capability Description
IEC
The International Electrotechnical Commission
(IEC for short) is involved in the preparation and
publication of international standards for electri-
cal, electronic and related technologies.
IEEE
Worldwide association of engineers, mainly from
the fields of electrical engineering and IT (Insti-
tute of Electrical and Electronics Engineers)
IP
Internet Protocol
Load sign convention
Definition for describing electrical circuits. The ar-
rows for current rating and voltage on a "con-
sumer" absorbing electrical power (e.g. a resis-
tor) face the same direction. U*I is the power ab-
sorbed by the component.
PRP
Redundancy protocol in accordance with IEC
62439-3 (Parallel Redundancy Protocol)
RSTP
Redundancy protocol in accordance with IEEE
802.1D-2004 (Rapid Spanning Tree Protocol)
SCADA
Technical processes are monitored and con-
trolled using a computer system (Supervisory
Control and Data Acquisition)
SNTP
NTP (Network Time Protocol) is a standard for
synchronizing clocks in computer systems using
packet-based communication networks. SNTP
(Simple Network Time Protocol) is the simplified
version of NTP.
TDSC
TAPCON® Dynamic Set Point Control
Summary of Contents for ECOTAP VPD CONTROL PRO
Page 1: ...Voltage Regulator ECOTAP VPD CONTROL PRO Operating Instructions 5252433 02 EN ...
Page 190: ......
Page 191: ......
