mr
.
steam
®
Installation & Operation Instructions
Home Wizard
™
____________________________________________________________________________________________________________________________________
4
INSTALLING THE iGENIE
™
WALL MOUNT
A wall mounting magnet is provided with the
iGenie Control as an optional convenience.
Secure the magnet mount to a wall so the iGenie
is oriented as shown. Use the double sided
adhesive to secure the magnet mount to the wall
as shown and simply place the iGenie FOB onto
the magnet mount with the battery door facing
the wall to mount it.
Double-Sided
Adhesive
Magnet Mount
Mounted iGenie
LIST OF REPLACEMENT PARTS
________________________________________________
DESCRIPTION
PART NUMBER
___________________________________________
iGenie FOB
104129
iGenie Module
104059
5 foot Cable
104060
This device complies with Industry Canada license-
exempt RSS standard(s). Operation is Subject to the
following two conditions: (1) this device may not
cause interference, and (2) this device must accept
any interference, including interference that may
cause undesired operation of the device.
TROUBLESHOOTING
NOTE:
The iGenie FOB will not operate the generator
without an iTempo, iTempo/Plus or iSteam control
I cannot control my steam generator with my iGenie:
______________________________________________________________
Is the light twinkling on the iGenie FOB when the button is
pressed?
If not, replace the batteries in the iGenie FOB.
If the light still does not twinkle, contact technical service.
______________________________________________________________
Are you within range of the IGENIE MODULE?
Go closer to the steam generator and see if that works. If the range
has diminished then the iGenie FOB battery may be getting weak.
______________________________________________________________
Go to the iGenie Module.
Are any of the iGenie Module indicator lights on?
If not check the connection to the steam generator. Unplug and re-
plug the iGenie Module from the steam generator.
Verify the steam generator is receiving the correct voltage.
_____________________________________________________________
Press the TOGGLE STEAM button on the IGENIE MODULE and
verify that it can control the steam generator. If no lights are on or
you cannot manually control the steam generator, contact technical
service.
______________________________________________________________
Press the ON/OFF button on the iGenie FOB. While the iGenie
FOB is twinkling, do you see the yellow RF activity light flashing on
the IGENIE MODULE?
If yes, then the address of the iGenie FOB and the IGENIE MOD-
ULE may not match. Enter pairing mode by pressing the TOGGLE
STEAM button on the iGenie Module until the blue light comes on.
While the blue light on the iGenie Module is on, press and hold
the ON/OFF button for 2 second until the LED flashes.
Exit pairing mode and test the iGenie FOB.
FCC ID: KSK-104058
FCC ID: KSK-104059
IC ID: 9321A-104058
IC ID:9321A-104059
Mr.Steam: S
Stte
ea
am
m G
Ge
en
niie
e
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Operation is subject to the following two conditions: 1) This device may not cause harmful interface, and
2) This device must accept any interface received, including interface that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
WARRANTY:
To view or download the Mr. Steam
Controls & Accessories Warranty and register your
product go to:
blog.mrsteam.com/wr
