10
Figure 12
Connecting AudioSteam
to the Steam Generator
To operate the AudioSteam via iSteam3, you must connect the
AudioSteam (
Figure 12
) to an internal connector in the steam generator.
1.
Remove the steam generator cover, and remove knockout
on steam generator.
2.
Plug the control cable into the AudioSteam as shown.
3.
Connect the control cable directly to the steam generator’s
circuit board (
A
in
Figure 13
),
OR
if an additional accessory
is installed in the steam generator, connect the control cable
to the supplied daughterboard (
B
in
Figure 13
).
4.
Plug the AudioSteam power cord into a 120V grounded
electrical outlet.
Power Cord
to 120V
Grounded
Outlet
Control Cable
Connection Port
Control Cable
Plug-In to
Steam Generator
mr
.
steam
®
INSTALLATION, OPERATION, AND MAINTENANCE
AudioSteam
®
All drawings are for illustrative purposes only.
INST
ALLER
Figure 13
Control
Cable
Control
Cable
Daughterboard
Control Cable
Knockout
Steam Generator
Circuit Board
Steam Generator
Circuit Board
Steam Generator
Circuit Board
Steam Generator
(shown with
cover removed
)
A
B
Shock hazard.
Power must be disconnected at the main electrical
supply before removing the steam generator cover. For informa-
tion about the steam generator, refer to the installation, operation,
and maintenance manual supplied with the steam generator (also
found at
www.mrsteam.com/technical
).
WARNING
!
Summary of Contents for AudioSteam
Page 17: ......
