9
WARNING: READ CAREFULLY THIS INSTRUCTIONS BEFORE INSTALLING
AND COMMISSIONING THE PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
PRODUCT INSTALLATION
The product at issue must be installed, commissioned
and maintained only by licensed and authorised
people, respecting the laws concerning the electrical
installations. Not conforming installations, wrong
adjustments or
product alterations may cause fire,
electric shock, or personal injuries. The manufacturer
is not responsible for
any damage due to wrong
installation or improper use.
Attention: at the power-
on the device resumes the status it had before the
turning-off.
ELECTRICAL CONNECTIONS
All the connections must be rated for a single-phase
230Vac power supply, with the relative Earth
connection. For the disconnection from the power line,
use an all-pole switch with contacts having a
dimension of at least 3
.
5mm. Arrange
all the
necessary safety devices
and use only materials
complying with the standard of electrical installations.
The cable must have a section properly rated according
to the load connected.
Attention:
If any cable is
damaged, it must be immediately replaced by a
qualified person in order to avoid any hazard.
manufacturer reserves the right for changing
technical data and features without prior notice.
SAFETY INFORMATION
Do not operate in the high voltage area of the electronic
board, when it is supplied. Use the product only in
combination with devices which can guarantee a safe
extended time functioning. The radio signal reception of
the device could be disturbed by the presence of
electrical disturbances being transmitted by other
appliances working on the same frequency or if the
product is somehow shielded by metal parts.
PRODUCT DISPOSAL
At the end of this product’s useful life, it must not be
disposed of as domestic waste, but must be taken to a
collection centre for waste electrical and electronic
equipment. It is the user’s responsibility to dispose of this
appliance through the appropriate channels at the end of
its useful life. Failure to do so may incur the penalties
established by laws governing waste disposal.
In the view of a constant development of their
products, the manufacturer reserves the right for
changing technical data and features without prior
notice.