Mr.Ken LA NEW ABS 56", User Manual

Page: 3 / 12

Assembly and installation steps for fans.
Downrod & Yoke & Canopy Installa on
1. Turn off power at breaker box to avoid possible electrical shock.
2. Use metal outlet box suitable for fan support. Secure outlet box directly to the building structure
using wood screws (included). Outlet box must suport 40 ibs min.
2.1. Remove cross pin and cotter pin from downrod.
2.2 Insert downrod through canopy and yoke cover, and feed motor lead wires through downrid.
2.3 Looesn 2 Dowrod jam scews at yoke. Insert dowrod assembly into yoke.
2.4 Insert the cross pin through yoke & downrod and secure with cotter pin
2.5 Tighten both downrod jam screws to furher secure downrod.
2.6 Pull down the yoke cover to cover yoke.
3
Moter & Blade Installa on
3.1 Upside the blade , Fasten Blade onto motor assembly hole using wahers & motor screws provided
from hardware bag. (Or fix in the Motor housing)
3.2. Then remove the two nuts a ached to the motor. The propeller to the same. Put the nut back to the
ghtening.
Hanging the fan
4.
1
Check whether the installation is strong enough to be installed.
4.2
Hold the base with the nut in the desired position. The position is already prepared for the cable.
4.3
. Composed of pipes and ball Insert the power cord and connect it to the motor. completed Go in to
hang Turn down the lock. After that, move the watch to make sure it is strong. If the ball is locked, it can
not move.
Ceiling
Hanger
Bracket
Hanger
Bracket
Ridge
Ball Notch
4