background image

2

Installation Instructions and Owner’s Manual

Unvented Natural Gas Vent Free Room Heaters

CONTENTS

WARNINGS ........................................................................2
SPECIFICATIONS .................................................................3
PRECAUTIONS ....................................................................3
IGNITION SYSTEM BATTERY INSTALLATION .......................4 
BLOWER FAN CONTROL SWITCH OPERATION ....................4 
DETERMINING THE TYPE OF HEATER LOCATION SPACE .....5
INSTALLATION ...................................................................6
FASTENING HEATER TO WALL ............................................7
FLOOR MOUNTING AWAY FROM WALL .............................8
CONNECTING TO GAS SUPPLY ...........................................8
OPERATING YOUR HEATER ............................................... 10
CLEANING AND MAINTENANCE .......................................11
TROUBLESHOOTING ........................................................ 14
EXPLODED-VIEW PARTS DRAWING ................................... 16
PARTS LIST ....................................................................... 17
WARRANTY  .................................................................... 20

In order to provide the best service possible Mr. Heater is now giving you 
more ways to get in touch with us:

WEBSITE:   Mr. HeaterÊs full line of product are now at:

 WWW.MRHEATER.COM

    FACEBOOK: Find us on Facebook

    TWITTER: Find us on twitter

        YouTube: There are now informational videos on YouTube.

SOCIAL MEDIA

WARNINGS

IMPORTANT

: Read this owner’s manual carefully and completely before trying to assemble, operate, or 

service this heater. Improper use of this heater can cause serious injury or death from burns, fi re, explosion, 
electrical shock, and carbon monoxide poisoning. 

WARNING:

 This appliance is equipped for natural 

gas. Field conversion is not permitted.

WARNING:

 Do not use any accessory not 

approved for use with this heater. 

WARNING: 

Any change to this heater or its 

controls can be dangerous. 

• 

Do not place clothing or other fl ammable ma-
terial on or near the appliance. 

• 

Due to high temperatures, heater should be 
kept out of traffi c and away from furniture and 
draperies. 

• 

Surface of heater becomes very hot when 
running. Keep children and adults away 
from hot surfaces to avoid burns or clothing 
ignition. Heater will remain hot for a time 
after shutdown. Allow heater surfaces to cool 
before handling. 

• 

Young children should be carefully supervised 
when they are in the same room with heater. 

• 

Make sure grille guard is in place before 
running heater. If screen or grille guard is 
removed for servicing it must be replaced prior 
to operating the heater. 

• 

Keep the appliance area clear and free from 
combustible materials, gasoline, and other 
fl ammable vapors and liquids. 

• 

Children and adults should be alerted to the 
hazard of high surface temperature and should 
stay away to avoid burns or clothing ignition.

• 

Any safety screen or guard removed for 
servicing an appliance must be replaced prior 
to operating the heater

Summary of Contents for MHVFBF20 NGT





















Reviews: