Mr Handsfree LED BEAT M300, User Manual

Page: 4 / 12

-4-
Note : After placing the LEDBeat M300 in a different location, it will need
to search for available FM stations again!
USB / MICRO SD/TF CARD MODE
1. Insert a USB device or SD/TF card into the corresponding slot at the
backside of the unit (7/8). You will hear “Music Play Mode”.
2. Your music will start to play automatically.
3. Short press I<< (3) or >>I (4) for previous/next track; short press >II
(1) for play or pause.
CUSTOMER SUPPORT
For more information, technical questions and return requests
concerning this product, you should contact support
@
mrhandsfree.com .
GUARANTEE
Mr Handsfree is a registered trademark of TE-Group NV. The mr
Handsfree brand stands for superior product quality and outstanding
customer service. That is why mr Handsfree warrants this product
against all defects in material and workmanship for a period of two (2)
years from the date of original purchase of the product. The conditions
of this guarantee and the extent of responsibility of mr Handsfree under
this guarantee can be downloaded from our website:
www.mrhandsfree.com .
If the Bluetooth
®
connection is not restored automatically after
disconnection, you can restore the connection manually in the menu of
your mobile phone.
B. STREAMING MUSIC
To control the music (play, pause, next track…) you can use:
• Buttons on your smartphone, tablet…
• Buttons on LEDBeat M300
C. HANDSFREE CALLING
When you receive an incoming call, you will hear “AUX mode” and the
phone number that is calling you. Press >II (1) to answer a call from your
mobile phone. Press >II (1) again to end the call.
Press >II (1) 2x to redial the last dialed number.
AUX MODE
1.
Insert one end of the AUX cable (11) into the AUX input port (9) at the
backside of the unit.
2.
Insert the other end of the cable into an external multimedia device
such as mobile phone, MP3 player, tablet, laptop… You will hear “AUX
mode” and the music will start playing.
FM RADIO MODE
1.
Go to the FM Radio mode using the M -button (2). You will hear “FM
Mode”.
2.
Short press >II (1) to search for available radio stations. The unit
will search all available radio stations and save them. Each time a
radio station is found, you will briefly hear the music, then the unit
continues its search for other stations. When the search is finished,
you will hear the first saved FM station.
3.
Use I<< (3) and >>I (4) to go to the previous or next station.
4.
To search more radio stations or improve the signal of the radio
stations, the LEDBeat M300 should be connected to the AUX cable,
which will work as an antenna.
5.
After turning off the speaker or choosing a different mode, and then
turning on FM mode again, the last radio station that you listened to
will be playing (all other stations are still saved).