CD-CDG FUNCTION
Product plays standard CD’s, karaoke CDG discs and CD-RW discs. Please note the quality of
CD-RW discs cannot be guaranteed.
1. STOP (#7) – Select this function to stop the CD/CDG from playing.
2. PLAY/PAUSE (#8)
1) Press the play/pause button to play and pause the CD, the CD tracks will show on
the LED display (#12).
3. FORWARD SKIP BUTTON (#9)
1) Press FORWARD SKIP button to select the next track.
4. BACK SKIP BUTTON (#15)
1) Press BACK SKIP button to select the previous track.
5. REPEAT/PROGRAM BUTTON (#16)
REPEAT FUNCTION
For repeat function to work, the disc must be in play mode.
1) Tap the replay/prog button (#16) once. The current playing track will then repeat and
the repeat LED indicator (#13) will flash to indicate.
2) Tap the replay/prog button (#16) twice. The current disc will play through all of the
tracks and then repeat them again. The repeat LED (#13) will be on.
3) Tap the replay/prog button (#16) three times. This will turn off the repeat function.
The repeat LED (#13) will be off.
PROGRAM FUNCTION
1) This function allows music tracks to be played in a programmed sequence.
2) NOTE: Program function can only be set when the machine is in STOP mode.
3) Press the REPEAT/PROGRAM BUTTON (#16) once. Program Number 01 will display
and PROGRAM INDICATOR will flash (#11).
4) Press the FORWARD SKIP BUTTON (#9) or BACK SKIP BUTTON (#15) to
select the track to be programmed.
5) Press the REPEAT/PROGRAM BUTTON (#16) again to store the selection. Advance
to 02 to prompt for the next input.
6) You may repeat steps #B to #C to program up to 20 tracks. As soon as you have
entered the 20th track, the LED DISPLAY (#12) will show “FU”, indicating that
program is full.
CONTINUED ON NEXT PAGE
HOW TO SET YOUR KARAOKE MACHINE UP
SOURCE SELECTION FUNCTIONS
1. Connect the power supply to the unit via the “ DC Jack” on the rear of the unit and press the
power on button on the front of the unit. Please remember to only use the power supply
provided with the karaoke machine.
2. Connect the microphone to the unit using the microphone 1 input on the front of the unit.
Before connecting the unit make sure the microphone and master volume controls are set to
minimum. A second microphone (not supplied) can be connected to Microphone input 2.
3. Source selection can be made by pressing the mode button on the front of the unit. You can
select from CDG (Disc), BT (Bluetooth), USB or Aux. Further information on how to work with
these different source selections can be found further down and should be used in conjunction
with this set up information.
4. After selecting your music source the microphone and master volume levels should be
adjusted to the suitable levels. By altering these levels it should be possible to achieve the
desired mix for your voice over the backing vocals and music.
5. Use the Echo control to add a reverb type effect you your voice and enhance the sound.
6. This unit also features an AVC control for use with special CD-G multiplex disc.
