Before Using Your Mr. Coffee
Make sure your first cup of coffee is as good as can be by cleaning
your Mr. Coffee coffeemaker before you use it the first time. Just
-follow these simple steps:
1. Wash the decanter, lid and brew funnel in a mixture of mild
detergent and water. Rinse each thoroughly.
2. Slide the brew funnel into place and then follow steps
through
in the “HOW TO.BREW COFFEE” section. This will clean the
inside of your coffeemaker.
3. When the brew cycle is finished. turn the machine off. Pour the
water out of the decanter and rinse the decanter and brew funnel.
Your coffeemaker is now ready to use.
.
1. Remove the brew funnel. Place one 4-cup Mr. Coffee paper filter
Inside.
2. Place coffee into the paper filter according to the coffee
measurement chart below.
3. Make sure the paper filter is in the proper position then slide the
brew funnel back into position.
4. Fill the decanter with tap water to desired capacity as marked on
the side of the decanter. (1 cup equals 5 ounces.) To brew 4 cups
of coffee, fill the decanter to the bottom of the silver band.
5. Pour the water into the intake screen. Place the empty decanter
onto
warmer plate. The decanter lid should be on.
6. plug the cord into the electrical outlet and turn the on/off switch
on. When coffee stops flowing, the brewing cycle is complete.
7. Discard the used
and filter. Rinse the brew funnel and
slide it back into place.
Note: The warmer plate will keep your coffee piping hot until you
turn your coffeemaker off.
8. To make another pot of coffee, tum the coffeemaker off and repeat
steps #1 through #7.
9. Be sure to turn the on/off switch off when the decanter is empty
and you are no longer using your coffeemaker. Unplug the power
cord when not in use.
COFFEE MEASUREMENT CHART
For best results, use level tablespoons
(tbls.) of drip grind or grind
recommended for automatic drip coffeemakers.
4 cups
4 level tbls.
3 cups
3 level
2 cups
2 level
1 cup
2 level tbls.
*Use more or less coffee to suit your taste.
-
-
4
