Mr. Coffee BVMC-SCGB SERIES, User Manual

Page: 14 / 40

14
CLEANING AND MAINTAINING YOUR COFFEEMAKER
Always turn off, unplug and allow the Coffeemaker to cool before cleaning.
1. Clean the housing, backsplash and the inside surface of the water reservoir
lid with a soapy, damp, nonabrasive cloth.
CAUTION: Do not immerse the coffeemaker, electrical cord or plug in
water or any other liquid or place in the dishwasher.
2. Do not use scouring pads, steel wool or any form of strong solvents or
abrasive cleaning agents to clean the appliance, as they can damage the
external surfaces of the appliance.
3. Remove both the BREW BASKET and PERMANENT FILTER by lifting
straight up and pulling away. Remove the FILTER & GRINDER LID by
pulling it out by the handle. Wash them with warm soapy water, rinse and
dry or just place in the dishwasher; top rack only.
TIP:
To speed up cleaning, rinse the PERMANENT FILTER
AND GRINDER BASKET on its sides to help release
coffee grounds quickly.
The BREW BASKET can be easily replaced by
inserting the brew spout end first then pushing
the basket down into place.
To replace the FILTER & GRINDER LID, place the lid
directly on the FILTER & GRINDER and close the
WATER RESERVOIR LID. The FILTER LID will automatically
snap back onto the shower head.
4. The DRIP TRAY can accumulate liquids. The DRIP TRAY and DRIP TRAY
PLATE should be periodically inspected and cleaned with a damp soapy
nonabrasive, lint-free cloth. The DRIP TRAY and DRIP TRAY PLATE can
be placed into the dishwasher; top rack only. To remove the DRIP TRAY
PLATE, insert a finger into the center opening of the plate and pull out.
To remove DRIP TRAY, grasp and pull it toward you, keeping it level at all
times to avoid spilling.