9.
10.
HOW TO MAKE YOUR FIRST
SHOT(S) OF ESPRESSO
1. Fill the
water tank
to the “MAX” marking with clean, filtered water.
2. Turn the coffeemaker ON by using the
power switch
on the side.
NOTE:
The
ready indicator
light will pulse while the coffeemaker heats up
and will turn solid when the coffeemaker is ready to use.
3. Select the
filter
size:
1-shot filter
or
2-shot filter
. Make sure the bump on
the
filter
is aligned with the notch on the
espresso portafilter
and place
the
filter
into the
espresso portafilter
.
4. Add espresso grounds into the
filter
.
5. Using the
tamper
, evenly tamp (press) espresso grounds. Then, wipe the
edges to clear any excess grinds.
6. If using a small cup, lower the
height adjustment tray
. If using a larger
cup, leave the
height adjustment tray
in the upright position.
7. Insert the
espresso portafilter
into the coffeemaker:
a. Keep the
espresso portafilter
handle flat.
b. Insert the
espresso portafilter
at a 45° angle (left).
c. Turn the
espresso portafilter
handle to a 90° angle. The
espresso
portafilter
should be in a centered position.
8. Place the cup underneath the
espresso portafilter
.
9. Turn the
knob
to the
“brew”
position.
10. Use the
brew size selector
to select 1 shot or 2 shots.
11. Press the
brew now
button.
12. When the coffeemaker beeps and the
brew now indicator
light turns off,
turn the
knob
to the
“standby”
position.
13. Enjoy!
HOW TO MAKE YOUR FIRST
SINGLE SERVE COFFEE
1. Fill the
water tank
to the “MAX” marking with clean, filtered water.
2. Turn the coffeemaker ON by using the
power switch
on the side.
NOTE:
The
ready indicator
light will pulse while the coffeemaker heats up
and will turn solid when the coffeemaker is ready to use.
3. Insert a K-Cup® Pod or
permanent single serve filter
inside the
single
serve portafilter
and press it down firmly. Then, place the
single serve
portafilter
lid over the K-CUP® Pod or
permanent single serve filter
and
insert it into the coffeemaker.
NOTE:
If using the
permanent single serve filter
, fill the basket with
coffee up to the edge where the nylon mesh ends (about 10 grams of
coffee). Do not over fill.
NOTE:
The
single serve portafilter
lid does not lay flat when a K-Cup®
Pod is inserted.
4. If using a small cup, lower the
height adjustment tray
. If using a larger
cup, leave the
height adjustment tray
in the upright position.
5. Insert the
single serve portafilter
into the coffeemaker:
a. Keep the
single serve portafilter
handle flat.
b. Insert the
single serve portafilter
at a 45° angle (left), ensuring the lid
closes during insertion.
c. Turn the
single serve portafilter
to a 90° angle. The
single serve
portafilter
should be in a centered position.
6. Place the cup underneath the
single serve portafilter
.
7. Turn the
knob
to the
“brew”
position.
8. Use the
brew size selector
to select the desired brew size.
9. Press the
brew now
button.
10. When the coffeemaker beeps and the
brew now indicator
light turns off,
turn the
knob
to the
“standby”
position.
11. Enjoy!
NOTE:
After brewing, remove the
single serve portafilter
from the
coffeemaker carefully and dump any remaining water into the sink before
lifting the lid.
1-SHOT
2-SHOT
TURN
TURN
a.
b.
c.
TURN
TURN
a.
b.
c.
BVMC-O-C_19ESM1.indd 9-10
5/24/19 09:16
