Mr. Coffee BVMC-JWX3-073, Instruction Manual

Page: 10 / 24

9
1. You must first set the time for when you would like the
coffee maker to begin brewing your coffee as described in
Setting the Clock and the Delay Brew Timer section.
2. Prepare your coffee maker as described in Adding Water
and Ground Coffee section.
3. To activate the delay brew function and program your
coffee maker to brew coffee at a later time, press the
DELAY BREW “ 启动/取消 ” button (Figure 6). The
delay indicator will appear on the digital display. The coffee maker is now
set to automatically brew coffee at the pre-set time.
4. At the pre-set time, the delay indicator will go off, indicating the brewing has
started.
5. The coffee maker warmer plate will keep your coffee hot for 1 hour and
then automatically turn off.
As a safety feature, your coffee maker will NOT start again automatically the
next day. If you want your coffee to brew at the same time the following day,
simply add a new filter, coffee and water and set delay brew, by repeating Steps
2-4 above.
NOTE: If the decanter is not in place then the coffee maker will not brew.
To cancel delay brew:
Press the OFF “
O/关
” button , the Delay indicator will disappear.
BREWING COFFEE LATER
Daily Cleaning
Always unplug the coffee maker and allow it to cool before cleaning. Remove
the filter basket, permanent filter, decanter and decanter lid and wash them in a
solution of hot water and mild liquid soap.
Unplug unit before cleaning. After unit is cool, wipe exterior with a soft, damp
cloth, and then dry with a soft towel.
Never use abrasive cleansers, steel wool pads or other abrasive materials.
Dishwasher top rack safe parts: glass decanter and lid, filter basket and
permanent filter.
CAUTION! Never immerse the coffee maker itself in water, in any other liquid or
place in the dishwasher.
CLEANING AND MAINTAINING
Figure 6
BVMC-JWX3-073_14ECM1.indd 9 20/11/14 5:26 PM