1
1
2
2
A
A
B
B
-Glue Fin and Stab
on the fuselage.
Step 17
Make sure that all your servo mecanisms for the rudder and elevator are made and work correctly.
Put in a crossmember so as to have no play in the elevator rod tube.
Verify your tail wheel bellcrank setup one last time and make sure that all screws are set with
Loc-Tite.
Sheet the entire rear fuselage section. (F10 to F19)
Use 1/4" balsa stick to make the corners of the fuselage and sand to shape.
Glue the dorsal fin (TA - Balsa 1/4")
=
=
=
=
=
DHC-2T Turbo Beaver
MR Aerodesign
=
FUSELAGE
TA
Balsa 1/4"
11-2014
