www.mqcon.com
- 6 -
2). In the setting interface, the leftmost red cursor arrow is used to
indicate the position of the currently set parameter.
3). Short press the M key, the setting parameter value on the right side
of the current line turns red, enter the parameter modification mode,
short press the up and down keys to change the setting parameters, press
the M key again, exit the current parameter modification mode, enter the
parameter switching/selection mode, short Press the up/down keys to
move the current setting parameters up and down.
4). At the bottom of the setup parameters, there are EXIT, Basic (other
pages have Display, etc.). Under this parameter, short press M to
enter/exit the lower level or current level menu.
Display setting interface
Item
Description
System
Setting the metric and imperial effects speed display and does not affect
the "wheel" settings in Basic setting menu.
Brightness
Backlight brightness setting
Auto off
Automatic sleep time, off is not automatic sleep
Battery
Main interface, battery display mode, voltage mode and battery
compartment
clock
Set the time of the clock, such as year, month, day, hour, minute, and
second
Basis
Basic settings, submenu entry
