page 12 — MQS36H SeRIeS WaLK-BeHIND TROWeL • OpeRaTION aND paRTS MaNUaL — Rev. #0 (03/08/12)
trOwel specificatiOns/diMensiOns
Table 1. Trowel Specifications
A–Height (Lifting Bale) – in. (mm)
27 (686)
Sound Pressure (Guaranteed) – dBA
2
94
B–Height (Handle) – in. (mm)
37.4 (950)
Vibration (Hand/Arm) – ft/s
2
(m/s
2
)
1
62 (19.0)
C–Width (Ring Diameter) – in. (mm)
40 (1,016)
Engine – H.P.
5.5/9.0
D–Length – in. (mm)
74 (1,880)
Rotor – RPM (Dry Concrete) MQS36H55
Rotor – RPM (Dry Concrete) MQS36H90H
60-130
90-150
Number of Blades
4
Ring Diameter – in. (mm)
37.38 (950)
Path Width – in. (mm)
34.5 (876)
Gear Box Oil Capacity – oz. (ml)
44 (1,300)
Sound Pressure (Weighted) – dBA
2
109
Shipping Weight – lbs. (kg.) MQS36H55
Shipping Weight – lbs. (kg.) MQS36H90H
225 (102)
235 (107)
1. Sound pressure is “A” weighted . Measured at the
operators ear position while the walk-behind trowel is
operating at full throttle on concrete in a manner most
often experienced in “normal ” circumstances. Sound
pressure may vary depending upon the condition of the
concrete. Hearing protection is always recommended.
2. The vibration level indicated is the maximum RMS
(Root Mean Square) value obtained at the handle
grip while operating the ride-on trowel on curing
concrete in a manner most often experienced in
“normal ” circumstances. Values were obtained from
all three axes of motion. The values shown represent
the maximum RMS value from these measurements.
C
D
TOP VIEW
A
A
A
B
SIDE VIEW
Figure 1. Dimensions
