4. CARRYING OUT A PRINTING OPERATION
4.1 Power on
Before powering the printer, check if batteries or
adapter is equipped well with the printer.
• Pushing the slide switch to "left" side
in order to power on the printer.
• Simultaneously, the LED will become bright.
4.2 Paper feeding
Before you start the printing operation, check if the
paper is installed properly in the right position. If it
is not, click easily to get access to proper location.
Note:
• Easily clicking to get 1 line space
• Continually depressing to get multi lines space.
4.3 Printing
• Connect the printer with the monitor as explained at 3.3.
• Push the print button on the monitor (for details please
refer to the manual of related monitor).
4.4 Low voltage indication
Once the LED is flashing under power-on operation,
it indicates to replace new batteries.
• Only replace the batteries, the printer will continue
next action’ otherwise, it won’t act.
Note:
• If the printer is connected with adapter,
there won’t be such a case happened.
4.5 Power off
After the printing task, just push the slide switch
to the "right” side in order to power off the printer.
• Simultaneously, the LED will become dark.
4.6 Cutting paper
Once you finish the printing job, check
the paper if it is easy to tear off.
• If it is not long enough to tear off, please depress
the Paper Feeding” button to lengthen the paper.
Note:
• Don’t pull out the paper if you’d like to cut paper.
• Try to lower down the paper, which tightly covers
on the paper cutter.
• The paper has to be vertical (90 degree) with the paper
cutter; otherwise, the paper will be difficult to tear off.
• The print on the paper does not last forever. This is
normal for thermo printers such as the MicroDrop
®
pr
diagnostic printer. The readability lasts longer the less
the print is in contact to light. If you file the print in a
folder, the print lasts very long. In case that you would
like to store the values forever, we recommend to photo
copy them or to transfer the data to another media.
LED flashing
LED bright
LED bright
LED bright
Aufgeleuchtete
LED-Anzeige
Papierschneider
90 °
MicroDrop®pr_GBA 23.07.2003 16:30 Uhr Seite 20
