GARDENIC
EN
28
10. CLEANING AND MAINTENANCE
We advise you to be careful and clean with gloves. Sharp elements of the cutterbar
can damage the skin of the hand.
It is essential to avoid contact with water and other liquids.
Disconnect the unit from the power supply before performing maintenance.
Clean the cutter bar with a plastic brush and a soft cloth. As shown in the following figure,
apply a protective layer of machine oil in spray or by means of an oil dispenser to the
cutter bar at the point indicated below.
Use only biodegradable oil.
Clean the plastic parts of the housing with a damp (wringed) cloth using a cleaner (dishwashing
liquid or similar).
Do not use agents or solvents that are aggressive to plastic surfaces.
