© 2019 mPTech
. All rights reserved.
HAMMER 4
13
informs you that there is a missed call or a new message. To check who called,
press
[View].
Another solution is to enter
[Menu] > [Call logs] > [Call history] >
[Missed calls] > <OK>.
To call back, select an unanswered call from the list, then
press the
<green handset>
key on the phone keyboard and select the SIM card
through which you wish to make a call.
Speakerphone mode
During a call press
[Speaker]
, to activate speakerphone mode. It will be
deactivated by pressing
[Phone].
Speed dial
This function works only with at least one SIM card inserted.
Select
[Menu] > [Contacts] > [Options] > [Contact Setup] > [Speed dial].
A list
of options will appear:
[Status],
to check the state of service
[Set numbers],
to
program speed dialling numbers. Choose option
[Status],
and press
<OK>
and
set
[Status]
to:
[On].
Choose an option
[Set numbers].
On the left side of the screen there are digits (2 to 9) which correspond with
keypad buttons. Using edit options:
[Edit]
> choose an entry from the contact
list which can be assigned to one of the numeric buttons (2 to 9). When you set
the numbers press
<red handset>
to return to the main phone screen. To
establish connection by speed dialling function press and hold for about 2
seconds the programmed button of phone numerical keyboard.
Dual SIM open
Dual SIM function enables using 2 SIM cards simultaneously. To use that
function one should mount two SIM cards in the phone (SIM slots are placed
beneath the phone battery). Subsequently enter
[Menu] > [Call logs] > [Call
settings] > [SIM 1 settings] or [SIM 2 settings]
You have the following options
to choose from:
•
[Call ID] -
to manage the display of the user number.
•
[Call waiting]
- to manage the waiting call.
•
[Call forwarding]
- to manage call forwarding.
•
[Caller blacklist]
–
to manage locked callers.
If there are two active SIM cards in your phone, the phone will ask you every
time which SIM card you want to use to send a message or make a call.
Connecting your phone to the computer
Hammer 4 can be plugged to the PC computer using USB cable. This allows you
to view and exchange data between your computer and your phone. To do this,
connect the microUSB plug to the phone connector (located on the bottom of
the phone), then connect the USB plug to the USB connector of the computer.
The screen of the phone should show information about connecting the USB
charger. Select
[USB]
from the list of possible USB port configurations
