© 2018 mPTech. All rights reserved. HAMMER BOW+ EN
17
Installation of the SIM card, memory card and battery
If the phone is switched on - switch it off.
Take off the back lid of the cover –
unscrew the screw fixing the lid by using
a flat screwdriver or the tool attached.
Insert the SIM card with its gold
contacts facing down, the way in which
the slot is embossed. Insert the memory
card with its gold contacts facing down,
the way in which the slot is embossed
(see the adjacent illustration). The
maximum memory card supported
capacity is 32 GB. Insert the battery - the
battery should be placed in such a way
that the gold contacts touch the
connector placed beneath the SIM card
slot. Replace the battery cover: put it
back in place - pay attention to rubber
gasket – and tighten the screw.
To remove the battery, reverse the action by opening
the battery cover and pulling out the battery.
Charging the battery
Plug the microUSB plug of the charger cable into the microUSB socket on your phone
(17) that will appear after you have lifted the rubber plug with your fingernail and
connect the charger to the wall outlet.
*Attention: Improper connection of the charger can cause serious damage to the
phone. Damages caused by an improper use of the phone are not covered by the
warranty.
While charging, a static icon of battery state located in upper right corner of the screen
will become animated. When charging is complete unplug the charger from the power
outlet. Unplug the cable from the socket on the phone.
Keypad lock
The keypad locks itself automatically after the time set by the user. It can also be
locked manually. To do this, press the <Menu> button and then press the <*> button.
To unlock the keyboard (when the display is blanked) one should press any button to
activate the screen then press <Unlock> button (located at the bottom left corner of
the display), followed by the <*> button on the keyboard. The keypad is unlocked. The
keyboard unlocks automatically with a closed flap gets opened.
Phone menu access
To gain access to the phone menu one should press
<Menu>
or
<OK>
button, while on
phone display. By pressing navigation buttons <Up>, <Down>, <Left> or <Right>, move
to the wanted menu icon. Press <OK> button to confirm your choice (and enter the
menu item) or <Back> to return to previous menu/desktop.
Sounds and user profiles
To change sound profile select: [Menu] > [Settings] > [Profiles]. Select a sound profile
and press <OK> to activate the chosen profile or
[Options] > [Customize] > [Select],
to
edit the profile according to your own preferences. The <#> button is used to switch
profiles in the standby mode.
MicroSD memory card slot
SIM card slots