User Guide
MP2663 Evaluation Kit (EVKT-MP2663)
MP2663 Evaluation Kit User Guide rev 1.0
MonolithicPower.com
8
3/13/2019
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
3.4 Device Programming Instructions
The MP2663-xxxx is an OTP part. Follow the instructions outlined below to create and export customized
configurations.
1. Using a computer, open the MPS GUI software. Make sure you have powered on the EVB.
2. Ensure connection between the EVB and computer.
3.
Select the “OTP View” in the tool bar. (see Figure 8)
Figure 8: Select OTP
4. Enter a new table (see Figure 9). You can change any parameters highlighted.
Figure 9: Parameters that can be Adjusted in OTP Mode
5. Select values from the drop-down menus. Please make sure all the parameters are populated before
selecting the EXPORT in the tool bar. Export the configuration by clicking EXPORT. (See Figure 10).