EV6501A – EVB DESCRIPTION
EV6501A Rev.1.0
www.MonolithicPower.com
8
3/9/2015
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2015 MPS. All Rights Reserved.
GUI OPERATION
A PC based GUI program is used to control the EV6501AGF-00B from a Windows PC. Connect the
board to a USB port on the computer.
When launched, the GUI shows selection buttons for three pages as shown below:
When the “Monitor” button is clicked, the screen below is displayed:
From this screen, a reset pulse can be generated for the MP6501A by pressing “Reset.” You can enter
or exit sleep mode by pressing “Sleep.” Pressing “Enable” will enable or disable the MP6501A.
*
Note that the MP6501A must be enabled before trying to move the motor using the next screen.
