EV2696A-Q-00B – I
2
C CONTROLLED 1-CELL SW CHARGER W/ PPM AND 3A BOOST EV BOARD
NOTICE:
The information in this document is subject to change without notice. Please contact MPS for current specifications.
Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS
products into any application. MPS will not assume any legal responsibility for any said applications.
EV2696A-Q-00B Rev. 1.1
www.MonolithicPower.com
7
1/8/2020
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2020 MPS. All Rights Reserved.
CONNECTIONS:
Table 1: Connectors
Connectors Description
TP1/BATT
Connect to battery pack positive terminal
TP2/GND
Connect to battery pack negative terminal
TP3/VIN
Connect to input source positive terminal
TP4/GND
Connect to input source negative terminal
TP5/SYS
Power bank output positive terminal
TP6/GND
Power bank output negative terminal
P1/ USB-A power output
Power bank output USB receptacle
P2/micro USB power input
Connect to input power adaptor
SCL/SDA/GND/INT I
2
C connector
NTC
Connect to external thermistor
Table 2: Jumpers and Shunts
Jumpers Description
Default
JP1
Connect on-board NTC divider
Install
JP2
Connect the pull up 10k resistors to VCC,
for SCL, SDA and INT.
Install
