EV2632-R-00A
Evaluation Board of All-in-one
3A Battery Charge and 3A Boost Discharge
EV2632-R-00A Rev. 1.1
www.MonolithicPower.com
1
10/8/2015
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2015 MPS. All Rights Reserved.
The Future of Analog IC Technology
DESCRIPTION
The EV2632-R-00A is the evaluation board
designed to demonstrate the capabilities of
MPS’ MP2632, a highly-integrated, flexible
switch-mode battery charge management for a
single-cell Li-ion and Li-Polymer battery used in
a wide range of applications.
EV2632 uses two operating modes—charge
mode and boost mode—to allow management
of system and battery power based on the state
of the input.
When input power is present, the board
charges a single-cell battery with a
programmable charge current of up to 3A.
In the absence of an input source, the board
switches to boost mode through the PB pin to
power the SYS pins from the battery with a
current of up to 3A.
The evaluation board provides 4-LED to
achieve the voltage based fuel gauge indication
and distinguish charge mode from boost mode.
To guarantee safe operation, the EV2632 has
input-over-voltage protection, battery over-
voltage protection, thermal shutdown, battery-
temperature monitoring, and a programmable
timer to prevent prolonged charging of a dead
battery.
ELECTRICAL SPECIFICATION
Parameter Symbol
Value
Units
Charge Mode
Input Voltage Range
V
IN
4.55 – 6
V
Charge-Full Voltage
V
BATT_Full
4.2 / 4.35
/ 4.45
V
Charge Current
I
CHG
3 A
Input Current Limit
I
IN_LIM
2.7 A
Boost Mode
Battery Voltage
V
BATT
3-4.5 V
SYS Voltage
Regulation
V
SYS
5 V
SYS Output Current
Limit
I
SYS
3 A
FEATURES
4.55V-to-6V Operating Input Voltage Range
Power Management Function Integrated
Input-Current-Limit and Input Voltage
Regulation
Up to 3A Programmable Charge Current
Selectable 4.45V / 4.35V / 4.2V Charge
Voltage with 0.5% Accuracy
Battery Temperature Monitoring
4-LED for battery fuel gauge indication
Programmable Timer Back-Up Protection
Battery-Reverse-Leakage
Blocking
Reverse-Boost-Operation for Powering
System
Up to 94% 5V Boost Mode Efficiency @ 3A
with BATT=4.5V
Up to 3A Programmable Output Current
Limit in Boost Mode
APPLICATIONS
Sub-battery Applications
Power-bank Applications for Smart-Phone,
Tablet and Other Portable Devices
All MPS parts are lead-free, halogen free, and adhere to the RoHS
directive. For MPS green status, please visit MPS website under Quality
Assurance.
“MPS” and “The Future of Analog IC Technology” are Registered
Trademarks of Monolithic Power Systems, Inc.
