Axes
Suggested:
Twin Handle File C/F
Fine:
To hone the edge
Coarse:
To prepare the edge
Knives
Suggested:
8 “ Bench Stone
Fine:
To keep a razor edge
Coarse:
To restore an edge
Small pointed tools and gouges
Suggested:
Credit Card Stone
Fine:
To maintain an edge
Coarse:
To restore a dull edge
Mower Blades
Suggested:
Twin Handle File X/C
Fine:
To hone the edge
Coarse:
To prepare the edge
Shears and Scissors
Suggested:
Credit Card Stone
Fine:
To hone the edge
Coarse:
To prepare the edge
Mount the axe
in a vice.
Keep the same angle as the knife
bevel on the diamond stone.
The angle is 20˚
for most knives.
Keep the bevel on the back of the
gouge flat on the diamond stone.
Roll the tool gently to hone.
Fix the
mower blade
position using
two clamps.
Dismantle the shears to work on the
cutting blade.
Lay the diamond stone flat on the
cutting edge bevel.
Stroke smoothly towards the tip of the
blade.
Lay the stone flat on the sliding face
and remove the burr with a light stroke
(as per the main image above).
Keep the diamond
surface flat to the
face of the blade
edge.
Perform light
strokes back
and forth.
Small tools should be honed as per
chisels, pointed tools should be
honed as per gouges.
Keep the diamond
surface flat to the tip
of the Axe blade
edge.
Perform light
strokes back
and forth on
both sides.
20˚
ACCESSORIES
Non-slip magnetic Diamond Stone
Holder (pair) - Ref 21
Suitable for use with Diamond Cross
Router Cutter Sharpener, Credit
Card & 8” Bench Stones.
Also fits all other brands of credit card
and bench diamond stones.
DIAMOND STONE MAINTENANCE
Continual satisfactory operation depends
upon proper tool care and regular
cleaning.
Cleaning
Clean with a damp cloth or cleaning
(eraser) block.
Storage
Ensure diamond stones are stored
separately.
Do not store the diamond stones in
damp conditions.
ENVIRONMENTAL PROTECTION
Re-cylce raw materials instead of
disposing as waste.
Packaging should be sorted for
environmental-friendly re-cylcing.
300
Stroke away from the body, alternating
on each said of the knife.
Light strokes will produce a finer edge.
30
0
The product and its accessories at the
end of its life should be sorted
for environmental-friendly recycling.
GUARANTEE
All MPOWER products are guaranteed
against any defects in either
workmanship or material, except
products that have been damaged due to
improper use or maintenance.
POLICY
Our policy of continuous improvement
means that specifications may change
without notice. MPOWER Tools Limited
cannot be held liable for any material
rendered unusable, or for any form of
consequential loss.
Manufactured by MPOWER Tools Ltd
Tel:
0044 (0)1980 629 526
Email:
Email:
Web:
www.m-powertools.com
Manor Farm Reserve - Newton Tony - Salisbury
Wiltshire - SP4 0HA - UK
© Copyright MPOWER Tools Ltd 2018
50117
