7. Fitting the router
8. Setting the Fixed Rod
Aligned
6
Bridge
B
A
6E
B
Hold Still
Align fixed rod (6) with the router base rod
drilling (B), so that both rods are aligned.
Slide the router onto both rods until it stops at
the Bridge end of the CRB7 assembly.
Using 2 x 1/2” (13mm) open ended spanners,
tighten both fixed rod nuts.
Tip:
Using two spanners when tightening the
fixed rod nuts will prevent the rod setting being
disturbed.
Both guide rod positions are now set.
Important - Before attempting any
machining pass:
Ensure that the router is securely fitted to the
CRB7 by checking ALL CRB7 fixings, including
router base wing bolts and micro adjuster lock
nut.
IMPORTANT
Follow the below steps in order:
1. Tighten router base wing bolt (A).
2. Finger-tighten fixed rod nut (6E).
3. Tighten router base wing bolt (B).
6
