When BH259A is connected to one or two smartphone, long press the “
” button for 3 seconds
to disconnect the current devices. Then, it enters pairing mode with the BT1 blue indicator light
flashing quickly.
Note: If you need to connect BH259A to a new one, please disable Bluetooth on the paired
smartphone.
3.4 Play Music
Next Track: Short press the “
” button.
Previous Track: Short press the “
” button.
Volume Up: Long press the “+” button.
Volume Down: Long press the “-” button.
4.Bluetooth Automatic Reconnection
1. Bluetooth connection will be disconnected, when the distance away from BH259A exceeds the
Bluetooth range or BH259A powers off.
2. RXReconnection: When the distance away from BH259A is within the Bluetooth range in 10min
or BH259A powers on again, BH259A will enter reconnection mode: the blue indicator light
flashes slowly (RX). Then, the two devices paired before the disconnection will be reconnected
with BH259A.
3. TX Reconnection:
When the distance away from BH259A is within the Bluetooth range with the green indicator
light flashingquickly (TX), BH259A will pair with your Bluetooth headphone.
When BH259A powers on again, it will enter reconnection mode: the green indicator light
flashes slowly (RX). Then, the two devices paired before the disconnection will be reconnected
with BH259A.
4. BH259A will automatically enter pairing mode when the reconnection can’t be complete after
BH259A powers on. Also, you can short press the “
” buttonto enter pairing mode manually
within reconnection mode.
Note: In TX mode,if the Bluetooth headphone (or Bluetooth speaker)‘s pairing list has already
been cleared,please clear the pairing list on BH259A simultaneously to complete the connection.
5.Clear Bluetooth Pairing List
In power-on state, to clear the pairing list paired before and enter pairing mode, long press the
“+” and “-” buttonssimultaneouslyfor 3 seconds until the three indicator lights
flashsimultaneously for 1s (The pairing list can’t be cleared in power-off state).
Note:
In Bluetooth receive mode, please clear pairing list on your smartphone simultaneously to
reconnect quickly.
BH259A will clear pairing list by itself when you turn the switch between TX and RX.
6.Low Power Prompt
When the battery is in low power, BH259A’s indicator light will flash red quickly. If the power is
too low, it will automatically power off.
7.Charging
When BH259A is in low power or can’t power on, you can charge it via a DC 5 V USB charging
cable. The red indicator light stays on during the charging process and goes off when the charging
is complete.
