MPMan TPM 500, Operation Manual

Page: 14 / 37

13
Power off: under playing or pause or stop status, continuously press button until the
LCD display OFF. Then release the button the unit is power off
Note: under pause or stop status, the unit will automatically power off if no operation
was conducted within 3 minutes.
3.3 previous / next file, FF/RW
Under playback status, shortly press - button to skip to the previous file; shortly press +
button to skip to the next file.
Under the state of playback, press “-” to skip to the previous file; press “+” to skip to the
next file; press and hold “+” to FF, press and hold “-” to RW.
3.4-volume adjustment
Press and hold “Mode”, a shine line will appear below the turntable of LCD. Press and
hold “+” to increase the volume, while continuously press “–“to decrease the volume.
And the volume indicator on the LCD will change accordingly.
3.5-EQ Mode selection
Shortly press EQ button to select EQ modes 1-7, which correspond to NATURAL,
ROCK, POP, CLASSIC, SOFT, JAZZ, and DBB effect.
3.6-REPEAT modes selection
Shortly press REP button to select repeat mode: no repeat, single repeat, and repeat all.