OPERATION(CONTINUED)
OPERATION(CONTINUED)
NORMAL RECORDING
8
9
10
11
This unit is capable of recording only when sound is heard. To use this feature, see the next page. For
normal recording, follow steps below.
NOTES:
NOTES:
. The built-in audio level automatically sets the recording level.
. The built-in audio level automatically sets the recording level.
. To record another message, simply repeat step 3,the message number will increase by one.
. To record another message, simply repeat step 3,the message number will increase by one.
. For normal voice levels, a distance of 5-9 inches is appropriate.
. For normal voice levels, a distance of 5-9 inches is appropriate.
VOICE ACTIVATED (VOX)RECORDING
VOICE ACTIVATED (VOX)RECORDING
Voice activated recording will allow dictation only when you speak.
Voice activated recording will allow dictation only when you speak.
When the unit detects a pause of a few seconds, it will temporarily stop recording until it detects sound
again.
When the unit detects a pause of a few seconds, it will temporarily stop recording until it detects sound
again.
TO PLAY BACK MESSAGES
TO PLAY BACK MESSAGES
TO REPEATEDLY PLAY BACK MESSAGES
TO REPEATEDLY PLAY BACK MESSAGES
You can set the unit to repeat1 or all messages as follows:
You can set the unit to repeat1 or all messages as follows:
TO CANCEL REPEAT PLAYBACK:
TO CANCEL REPEAT PLAYBACK:
To cancel repeat playback, press the ERASE/REPEAT button once or twice until the REPEAT indicator
disappears from the display.
To cancel repeat playback, press the ERASE/REPEAT button once or twice until the REPEAT indicator
disappears from the display.
TO PAUSE A MESSAGE
TO PAUSE A MESSAGE
1
2
Make sure the VOX switch on the
side of unit is set to OFF. Turn the
unit on, and select the desired sound
quality as described on page 6.
Select a File Folder by pressing the FILE/TIME
button (see page7).
3
4
Press the PLAY/STOP button
1
to see the
remaining recording time during recording. To pause
recording ,press the MODE/PAUSE
button
2
;PAUSE will blink in the display. To release
pause press the MODE/PAUSE button
2
again.
While in the standby mode, press the
REC/STOP button and the REC indicator will light
and the elapsed time will appear.
Speak into the built-in microphone or insert a
microphone into the MIC jack and speak to it with a
normal tone of voice. Press the REC /STOP button
again to stop recording.
OPERATION(CONTINUED)
1
2
Slide the VOX switch on the side of the
unit to the ON position. Turn the unit
on,and select the descried sound quality
as described on page 6.
Select a FILE Folder by pressing the
FILE/TIME button(see page7).
3
Press the REC/STOP button and the REC
indicator will light and the elapsed time will appear.
Speak into the built-in microphone or insert a
micro-phone into the MIC jack and when the unit
picks up sound, it will record. When not
recording ,the REC indicator will blink and
PAUSE will blink in the display until sound is
detected.
Press the REC/STOP button again to stop
recording.
NOTES:
.The first few sounds activate the recorder
and may not be recorded.
. A variation in voice level
during recording will not
stop the unit. two seconds of silence is
required to stop the recording.
. For constant recording, see previous page.
.To pause, press the MODE/PAUSE
.The built-in audio level automatically sets the
recording level.
. For normal voice levels, a distance of 5-9
inches is appropriate.
1
2
Turn the unit on and select a File
Folder by pressing the FILE/TIME
button(see page7).
Select the desired message number by pressing
the REV
1
or FWD
2
button; the message number and the message
length will appear in the display.
3
While in the standby mode, press the
PLAY/STOP button
1
; the unit will play
the currently selected message, then
stop. During playback,
the play indicator and the elapsed time of
the message will appear in the display.
You can check the message recording
time and date by pressing the
REC/STOP button
2
.
NOTES:
.To pause, press the MODE/ PAUSE
button; PAUSE will blink in the display. To
release pause, press the MODE/PAUSE
button again.
. For Clue and Review during playback,
simply press and hold the desired REV or
FWD button.
A chattering sound will be heard.
Release the button when the desired point
is reached.
.To skip or go back messages, simply press
and release the desired REV or FWD button
until the desired message number is
reached.
EARHONE JACK
For private listening, connect an earphone (not included) to this jack.
The speaker is automatically disconnected when the earphone plug is inserted in the jack.
OPERATION(CONTINUED)
1
2
REPEAT MESSAGE: While playing back a
message, press the ERASE/REPEAT
button
1
once, “REPEAT” will appear in the
display and the message playing
will repeat over and over until the
PLAY/STOP button
2
is pressed.
REPEAT All MESSAGES:
While Playing
back a message, press the ERASE/REPEAT
button
1
twice; “REPEAT ALL” will appear in
the display and all messages in the selected
file folder will repeat over and over until the
PLAY/STOP button
2
is pressed.
1
2
To pause Recording or playback,
press the MODE/PAUSE button;
PAUSE will blink in the display.
Press the MODE/PAUSE button
again to resume recording or
playback.
