MPM MZE-21, User Manual

Page: 14 / 32

DRY (NO STEAM) IRONING
1.
Set the steam output control slider
❶
to “NO STEAM”
2.
Set the recommended ironing temperature (see TEMPERATURE SETTING).
SPRAY JET FUNCTION
This function helps removing persistent creases.
1.
Make sure that the water tank
❽
has enough water.
2.
To dampen the textile being ironed, press the water spray button
❸
several times.
STEAM BLAST
This function can be used in the horizontal and vertical positions. It helps removing creases
on hanging clothes, curtains, etc. Use the steam blast only at the highest temperature setting.
CAUTION! The iron blasts much steam! Hazard of burns! Never direct steam jets towards people or animals!
1.
Check that the water tank is filled.
2.
Press the steam blast button
❹
as required when ironing.
ANTI DRIP LOCK
The iron features the Anti Drip lock: the appliance automatically stops steam when the tem-
perature becomes too low.
„ANTI CALC” FUNCTION – ACTIVE ANTYCALCIUM SYSTEM
Antycalcium input prevents from blocking the steam nozzles by stone plates. It is perma-
nently ac tive and it is not necessary to replace it.
IRONING FINISH
1.
Set temperature adjustment knob to MIN.
2.
Remove the power cord plug
❻
from the mains outlet.
3.
Empty the water tank
❽
after steam ironing.
4.
Put away the iron standing up in a safe place and wait for it to cool down.
CLEANING AND MAINTENANCE
CAUTION! Never immerse the iron in water or rinse it under a tap.
1.
Wipe scale flakes and other deposits from the iron sole
❾
with a damp cloth and a non-
abrasive (liquid) detergent.
CAUTION! Keep the iron away from metal objects to protect the sole from scratching. Never clean the iron sole with
abrasive pads (incl. hard sponges), vinegar or other chemicals.
2.
Wipe the iron top body with a damp cloth.
3.
Periodically flush the water tank
❽
with clean water and empty the tank when done.
14
EN