MPM MSW-13, User Manual

Page: 11 / 24

11
GB
USING THE HAIR STRAIGHTENER
1.
The hairdryer has a system protecting it against overheating - if
the air outlets are blocked it switches off automatically, then swit-
ches itself on again once it has cooled down.
2.
During long drying sessions it is recommended that you switch
the dryer off for a while.
3.
Plug the dryer in, first ensuring that the switch (3) is set to „0”.
4.
Select the required drying speed and temperature.
5.
Set the switch to „1” for a moderate air flow.
6.
Set the switch to „2” for a strong air flow.
7.
After drying, set the switch to 0.
ATTENTION! The dryer is equipped with a styling nozzle and a diffuser. The
styling nozzle is used to facilitate drying hair by directing a compact stream
of air to the selected strand of hair, and the diffuser gives the hair volume and
fluffiness. Installation of accessories is done by connecting them with the dryer
in the inlet locations.
CLEANING AND MAINTENANCE
1.
The hairdryer does not require any special maintenance. Simply
keep to the following rules.
2.
The appliance should be kept clean for it to work properly. Never
cover the air outlet as this could easily lead to the appliance over-
heating.
3.
Always unplug the appliance after drying hair or before cleaning
it.
4.
The air nozzle should be cleaned with a brush from time to time.
5.
The casing of the appliance may be cleaned with a damp cloth.
6.
After drying, wait until the dryer cools down.
7.
Do not wrap the power cord around the appliance!