4.3. USING THE TOUCH CONTROLS
The controls respond to touch, so you don’t need to apply any pressure.
Use the ball of your finger, not its tip.
You will hear a beep each time a touch is registered.
Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a
cloth) covering them. Even a thin film of water may make the controls difficult to operate.
USING YOUR HOB
TO START COOKING
ON-OFF
1.
To turn the appliance on or off, press and hold the
Power On/Off control (5) until you hear a ‘beep’.
When the appliance powers up, the heat zone indicators
will display.
2.
Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3.
Touching the heating zone selection control,
and an indicator next to the key will flash.
If you don’t choose a heat setting within 1minute, the ceramic hob will automatically switch
off. You will need to start again at step 1.
You can modify the heat setting at any time during cooking.
You can modify the power level from 0 to 9 By the slide control.
33
GB
