11
GB
13.
HEPA 13 filter
14.
Air discharge filter inner sponge insert
15.
Grill release latches
16.
3.5 liter dust bag with microfilter
17.
Motor filter
18.
Metal telescopic wand
19.
Suction hose
20.
Suction hose mounting ring
21.
Suction hose handle
22.
Floor and carpet tool
23.
Slide-out crevice tool
24.
Small multifunctional brush with
adapter
25.
Parquet brush tool
26.
Accessories holder
27.
Rubber-tyred wheels
28.
4-step suction power indicator
STATIC ELECTRICITY
Vacuum cleaning certain surfaces at a low air humidity may cause slight electrification of the
appliance. This is natural, does not damage the appliance and does not constitute its defect.
To minimise this phenomenon, it is recommended to:
frequently discharge the appliance by touching items in the room with the metal pipe,
increase air humidity in the room,
use generally available anti-electrostatic products.
APPLIANCE ASSEMBLY
1.
Press both latches on the suction hose mounting ring (20), insert the ring into the opening
(8) and release the latches. To disassemble, press the latches again and remove the ring (20)
from the opening (8).
2.
Connect the wand (18) to the handle (21) on the other end of the suction (19). Install one of
the tools, (22), (23), (24) or (25), on the end of the wand.
USING THE APPLIANCE
1.
Before turning on the vacuum cleaner, unwind the power cord (10) to a suitable length and
plug it into the mains socket. The yellow mark on the power cord indicates the optimum
length. Do not pull out the cord beyond the red mark! While unwinding the cord, do not
press the cord winder button (3).
2.
Press the switch (4) to turn on the vacuum cleaner.
3.
To wind the power cord, press the cord winder button (3) with one hand, while holding the
cord with another hand to prevent a sudden movement that could damage it.
Note! It is recommended to set the suction power control q to MIN before turning on the vacuum cleaner!
When at work, you can regulate the suction power by moving the suction power control left or right to a suita-
ble position.
There are 4 suction force level indicators on the vacuum cleaner which depict the
recommended application of each level (28).
The suction force level you set will light blue.
Summary of Contents for MOD-23
Page 27: ......
