MPM MMM-03M, User Manual, Page: 8 / 20

8
GB
ASSEMBLING AND USING THE GRATER
CAUTION! Before first use, clean all the elements of the grater in warm water with a detergent, then rinse and
dry.
1.
Detach the mincing chamber from your MMM-03 meat mincer and attach the shredder cas-
ing (5) in its place.
2.
Attach an appropriate grater (1), (2), (3) or (4), onto the shredder casing (5), face-up, and close
the lid of the grater lock (6). Make sure the lid is properly fastened in place. The lid can be
unlocked by pressing the bottom of the shredder casing, near the latch.
3.
Connect the mincer to mains outlet and turn it on with the switch.
4.
Cut the products into pieces small enough to fit into the chamber. Do not shred stone fruits.
Push the products with the pusher while operating the shredder (7).
5.
After use, turn the mincer off, unplug it from the mains and detach the shredder from the
mincer just like the mincing chamber.
6.
Clean all parts of the shredder.
CLEANING AND MAINTENANCE
CAUTION! The shredder must be detached from the mincer before cleaning. Do not clean the shredder still
attached to the mincer. Do not immerse the meat mincer in water.
CAUTION! Take extreme care while cleaning the graters. Cutting risk.
1.
Wash all parts of the shredder with lukewarm water and a detergent, rinse clean with water,
and leave to dry.
2.
Washing the shredder parts in a dishwasher is not recommended.
3.
Graters do not require regeneration procedures.
CAUTION! MPM agd S.A. may change the technical features of the product without notice.
PROPER DISPOSAL OF THE PRODUCT
(waste electrical and electronic equipment)
Poland This symbol on the product indicates that the product, after its lifetime, should not be disposed with other
household wastes. To avoid harmful influence on the environment and human health due to uncontrolled
waste disposal, dispose the waste device to the service point of waste household appliances or report
collecting it from home. In order to obtain detailed information about the location and how to dispose the
waste electrical and electronic equipment in a safe way, contact your retailer or local Department of Environmental
Protection. Do not dispose the device with other municipal waste.