background image

MEH-10093-001 Rev. B

IDE2PCC

User Manual

7.

COPYRIGHT, REVISION HISTORY

Copyright © 2002 by MPL AG Elektronikunternehmen. All rights are reserved. Reproduction of this document in part or 
whole, by any means, is prohibited, without written permission from MPL AG Elektronikunternehmen.

This Manual reflects the revision A of the IDE2PCC.
Publication Date: November 2002

Manual 
Revision

Date

Description

A Preliminary 27.09.2002

Initial Write

A

25.04.2003

Add   sections  5.3  and  5.5,   correct  some  typos,   add   the  picture,   split   the  Manual   for 
IDE2PCC and IDE2CF, add the front pages picture.

B

08.09.2010

Adapted to new PCB-Layout

8.

DISCLAIMER

MPL AG has fully tested the IDE2PCC module and reviewed the documentation. However, MPL AG makes no warranty 
or representation, either expressed, or implied, with respect to this product, its quality, performance, merchantability, or 
fitness for a particular purpose.

In no event will MPL AG be liable for direct, indirect, special, incidental, or consequential damages resulting from any 
defect in the product or its documentation, even if advised of the possibility of such damages. In particular MPL AG shall 
have no liability for any parts connected to this product.

MPL AG reserves the right to make changes to any product herein to improve reliability, function or design.

9.

SUPPORT

In case of questions please feel free to contact us at our homepage (

www.mpl.ch

) or per email (

[email protected]

).

Our Local Distributor:

 2003 by MPL AG

12

High-Tech • Made in Switzerland

Summary of Contents for IDE2PCC













Reviews: